Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

cctv over g3 wiring

Status
Not open for further replies.

chris5225

Programmer
Mar 7, 2011
68
US
Hello
I do contract work for motels mostly on the g3. Is is possible to run security camera (cctv) thru the 66 blocks and demarc and convert it to cable again. I have the passive balun for each end but they are only suposed to work on cat5e or higher. There are 4 buildings with a 25 pair run to each.
I would greatly appreciate if anyone could point me in the right direction.
IF this is the wrong forum, then please let me know if there is an appropriate forum.
Thanks
Chris
 
Probably the wrong forum but if your specs say cat5e or better and you are asking if lower quality riser cable will work (likely cat3), the answer is probably no. Since you are a contractor and will need to stand behind/support your work, the correct answer is that the existing cabling does not meet the specs for the equipment.



-CL
 
Lopes
IT WORKS with passive baluns, and property owner is aware of all
Thanks
chrisalkire@yahoo.com
Chris
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top