Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CCR Tree

Status
Not open for further replies.

Audioman1

Technical User
Aug 21, 2005
52
US
Is there a way to test your CCR tree without calling
in to your VM?
 
take last number out of yoour outgoing line pool...assign it to the table u want to test..to program ..if its a new ..there is no issue ..if its a major changee...biuld as tree not being used..test ..then after its tested and to your satisfaction copy over the existing working tree...

more to it than that but thats all i will give for free

"There are those who would make you believe there are no choices left.That they have the last word and its final.To those who try the world is wide open choices many.To those who dont only death awaits you.
 
Awkward as it is, dialing in from outside is the very best way to test a CCR. Such testing ensures external call handling is correct. Internal calls in Norstar are not handled in quite the same way as external calls.

PhM

\

VVV
 
Hookup an ATA to the system. Then take the output of the ATA and attach it to a spare line in the system. Setup the voicemail to answer on 0 rings for the line.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top