Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CCC Wallboards & Delta server losing connection

Status
Not open for further replies.

dudspog

Technical User
Dec 1, 2008
22
GB
Hi,
It's been a while since I worked on IPO so be nice (please)!
Anyway, I have an IP Office (5.0.26) with CCC (delta server 5.2.36) with wallboards that intermittently lose connection (connection lost message)every couple of days.
It's 3 WB's, but they don't all go at once.
When you try to reconnect to the wallboard server (click OK)it says it is already connected(and it is connected and showing real time stats, it's like a very fast disconnect & re-connect)
The only way to get rid of the message is to close the WB app & restart it.
It's only just started doing this, it's been in well over a year.

So far the only odd thing I can find is the Delta server event viewer showing this....it gives this message non-stop.

12:08:07 Connected (AM Clt) T System 192.168.1.50
12:08:07 In Service
12:08:10 Original Port Value 301 - 211
12:08:10 Hardware lookup failed
12:08:12 Connected (AM Clt) T System 192.168.1.50
12:08:12 In Service
12:08:17 Connected (AM Clt) T System 192.168.1.50
12:08:17 In Service
12:08:22 Connected (AM Clt) T System 192.168.1.50
12:08:22 In Service
12:08:27 Connected (AM Clt) T System 192.168.1.50
12:08:27 In Service
12:08:28 Original Port Value 292 - 202
12:08:28 Hardware lookup failed
12:08:28 Original Port Value 292 - 202
12:08:28 Hardware lookup failed
12:08:32 Connected (AM Clt) T System 192.168.1.50
12:08:32 In Service
12:08:33 Original Port Value 292 - 202
12:08:33 Hardware lookup failed
12:08:37 Connected (AM Clt) T System 192.168.1.50
12:08:37 In Service
12:08:40 Original Port Value 292 - 202
12:08:40 Hardware lookup failed
12:08:42 Connected (AM Clt) T System 192.168.1.50
12:08:42 In Service
12:08:44 Original Port Value 319 - 229
12:08:44 Hardware lookup failed
12:08:47 Connected (AM Clt) T System 192.168.1.50
12:08:47 In Service
12:08:51 Original Port Value 292 - 202
12:08:51 Hardware lookup failed
12:08:52 Connected (AM Clt) T System 192.168.1.50

Wireshark doesn't show anything weird and neither does the monitor trace(that I can see).
Re-booted the server & IPO.

I'm probably missing something really obvious, but at the moment I'm stuck.
Any suggestions...
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top