I've read through the posts about resolving boot problems, as well as numerous cisco docs, but my 2948 keeps booting to rommon. What am I doing wrong here? As usual, any help will be GREATLY appreciated! Thanks in advance vipergg ;-)
rommon 3 > dir bootflash:
File size Checksum File name
3963376 bytes (0x3c79f0) 0x8a379198 cat4000.5-5-21.bin
rommon 4 > show boot
BOOT variable = cat4000.5-5-21.bin,1;
Configuration reg is 0x0
ignore-config: disabled
console baud: 9600
boot: the ROM monitor
autoboot state = 0
autoboot count = 0
rommon 2 > set
PS1=rommon ! >
DiagBootMode=post
MemorySize=64
ResetCause=20
TmpfsAddr=2197815296
TmpfsSize=12582912
TmpfsDirectorySize=10240
DiagFreePageLimit=12288
AutobootStatus=fail
?=0
BOOT=cat4000.5-5-21.bin,1;
WHICHBOOT=bootflash:cat4000.5-5-21.bin
ROMVERSION=6.1(5)
rommon 3 > dir bootflash:
File size Checksum File name
3963376 bytes (0x3c79f0) 0x8a379198 cat4000.5-5-21.bin
rommon 4 > show boot
BOOT variable = cat4000.5-5-21.bin,1;
Configuration reg is 0x0
ignore-config: disabled
console baud: 9600
boot: the ROM monitor
autoboot state = 0
autoboot count = 0
rommon 2 > set
PS1=rommon ! >
DiagBootMode=post
MemorySize=64
ResetCause=20
TmpfsAddr=2197815296
TmpfsSize=12582912
TmpfsDirectorySize=10240
DiagFreePageLimit=12288
AutobootStatus=fail
?=0
BOOT=cat4000.5-5-21.bin,1;
WHICHBOOT=bootflash:cat4000.5-5-21.bin
ROMVERSION=6.1(5)