Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

catos boots into rommon

Status
Not open for further replies.

paulux

MIS
Aug 1, 2007
16
US
I've read through the posts about resolving boot problems, as well as numerous cisco docs, but my 2948 keeps booting to rommon. What am I doing wrong here? As usual, any help will be GREATLY appreciated! Thanks in advance vipergg ;-)

rommon 3 > dir bootflash:
File size Checksum File name

3963376 bytes (0x3c79f0) 0x8a379198 cat4000.5-5-21.bin

rommon 4 > show boot
BOOT variable = cat4000.5-5-21.bin,1;
Configuration reg is 0x0
ignore-config: disabled
console baud: 9600
boot: the ROM monitor
autoboot state = 0
autoboot count = 0

rommon 2 > set
PS1=rommon ! >
DiagBootMode=post
MemorySize=64
ResetCause=20
TmpfsAddr=2197815296
TmpfsSize=12582912
TmpfsDirectorySize=10240
DiagFreePageLimit=12288
AutobootStatus=fail
?=0
BOOT=cat4000.5-5-21.bin,1;
WHICHBOOT=bootflash:cat4000.5-5-21.bin
ROMVERSION=6.1(5)
 
Change config register to 0x102 . Then issue clear boot system all. Then add "set boot system flash bootflash:cat4000.5-5-21.bin .
 
thanks for the prompt response vipergg - I appreciate it. I tried the recommended commands, but still boot into rommon. Am I doing something wrong?

rommon 3 > set boot config-register 0xf
rommon 4 > clear boot system all
Usage: clear boot
rommon 5 > set boot system flash bootflash:cat4000.5-5-21.bin
BOOT variable = cat4000.5-5-21.bin,1;bootflash:cat4000.5-5-21.bin,1;
rommon 6 > reset
0:00.576584: Please set IPAddr variable
0:00.577166: Please set Netmask variable
0:00.577523: Please set Broadcast variable
0:00.577888: No gateway has been specified
0:00.578455: Network is not configured
WS-C2948G bootrom version 6.1(5), built on 2003.03.19 16:59:08
H/W Revisions: Fin: 2 Head: 11 Board: 1
Supervisor MAC addresses: 00:05:73:17:78:00 through 00:05:73:17:7b:ff (1024 addr
esses)
Installed memory: 64 MB
Testing LEDs.... done!
The system will autoboot in 5 seconds.
Type control-C to prevent autobooting.
rommon 1 >
The system will now begin autobooting.
Autobooting image: "cat4000.5-5-21.bin"
0:07.807943: Network is not configured
Network download of "cat4000.5-5-21.bin" failed
loadprog: error - on file open
Booting "cat4000.5-5-21.bin" failed. (loadprog() returned -1.)
Resetting system...
0:00.576543: Please set IPAddr variable
0:00.577125: Please set Netmask variable
0:00.577481: Please set Broadcast variable
0:00.577844: No gateway has been specified
0:00.578413: Network is not configured
WS-C2948G bootrom version 6.1(5), built on 2003.03.19 16:59:08
H/W Revisions: Fin: 2 Head: 11 Board: 1
Supervisor MAC addresses: 00:05:73:17:78:00 through 00:05:73:17:7b:ff (1024 addr
esses)
Installed memory: 64 MB
Testing LEDs.... done!
The system will autoboot in 5 seconds.
Type control-C to prevent autobooting.
rommon 1 >
The system will now begin autobooting.
Autobooting image: "bootflash:cat4000.5-5-21.bin"
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC0:00.576573: Please set IPAddr variable
0:00.577157: Please set Netmask variable
0:00.577514: Please set Broadcast variable
0:00.577877: No gateway has been specified
0:00.578447: Network is not configured
WS-C2948G bootrom version 6.1(5), built on 2003.03.19 16:59:08
H/W Revisions: Fin: 2 Head: 11 Board: 1
Supervisor MAC addresses: 00:05:73:17:78:00 through 00:05:73:17:7b:ff (1024 addr
esses)
Installed memory: 64 MB
Testing LEDs.... done!
The system will autoboot in 5 seconds.
Type control-C to prevent autobooting.
rommon 1 >
The system will now begin autobooting.
Autobooting image: "bootflash:cat4000.5-5-21.bin"
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC0:00.576573: Please set IPAddr variable
0:00.577157: Please set Netmask variable
0:00.577514: Please set Broadcast variable
0:00.577877: No gateway has been specified
0:00.578447: Network is not configured
WS-C2948G bootrom version 6.1(5), built on 2003.03.19 16:59:08
H/W Revisions: Fin: 2 Head: 11 Board: 1
Supervisor MAC addresses: 00:05:73:17:78:00 through 00:05:73:17:7b:ff (1024 addr
esses)
Installed memory: 64 MB
Testing LEDs.... done!
rommon 1 > dir bootflash:
File size Checksum File name

3963376 bytes (0x3c79f0) 0x8a379198 cat4000.5-5-21.bin
 
At the rommon prompt try issueing "boot bootflash:cat4000.5-5-21.bin and see if it will boot , change those other parameters after it boots all the way up. Do not issue a reset .
 
Still no luck:

rommon 2 > boot bootflash:cat4000.5-5-21.bin
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC0:00.576610: Please set IPAddr variable
0:00.577197: Please set Netmask variable
0:00.577556: Please set Broadcast variable
0:00.577918: No gateway has been specified
0:00.578486: Network is not configured
WS-C2948G bootrom version 6.1(5), built on 2003.03.19 16:59:08
H/W Revisions: Fin: 2 Head: 11 Board: 1
Supervisor MAC addresses: 00:05:73:17:78:00 through 00:05:73:17:7b:ff (1024 addr
esses)
Installed memory: 64 MB
Testing LEDs.... done!
rommon 1 >
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top