GottaBeKiN
Technical User
Hi, I got an 5509 recently, it has WS-5530-E3 Supervisor III running CATos. I am wonder if this switch is capable to run IOS? If yes how I would go about upgrading it. Thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Catalyst 5509 question
- Thread starter GottaBeKiN
- Start date
- Status
- Thread starter
- #3
GottaBeKiN
Technical User
It does have 2 WS-5302 RSM in it. But it probably won't run any new ios right? Hey vipergg, if I want to buy some 2950s for a home lab that will last at least till after CCNP, I should get one with the enhanced image right?
The last version for the RSM cards was 12.2.46 which you could get in enterprise version which basically supports everything . Depending on how dram you had on the supervisor the last version was 6.4.21 for the layer 2 catos side . If you can get 2950 like that , thats basically what they use for the tests now .
- Status
Similar threads
- Locked
- Question