Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
*cat files/job ids
- Thread starter Stacy12
- Start date
- Thread starter
- #2
Well I looked for some documentation and saw that if we were getting * in the job id that it may be the service account without enough permissions to write to the database. Sure enough that may be it. We changed the service account a few months ago and that looks like it may be it. I am running the mergecat now to see if that is it...crossing my fingers...Suggestions and comments still welcome!
- Thread starter
- #3
This did not work although I have shared this correctly now. I am seeing we have to have db corruption. Anyone have any suggestions on what is the best way to fix this?
DB is about 16gb
tmp folder is about 498 mb full of security cat files and the other diff tmp files (not worried about those)
DB is about 16gb
tmp folder is about 498 mb full of security cat files and the other diff tmp files (not worried about those)
Stacy,
There is a couple of articles on this on the CA support website, the best I found is:
This is for ARCserve 2000. If you are using 6.61 then you could try using the repair function in the dbutil.exe applet.
Cheers.
There is a couple of articles on this on the CA support website, the best I found is:
This is for ARCserve 2000. If you are using 6.61 then you could try using the repair function in the dbutil.exe applet.
Cheers.
- Status
Similar threads
- Locked
- Question