Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CAS system

Status
Not open for further replies.

user25

Technical User
Jan 6, 2008
39
DZ
hi every body!

in our company we need to interconnect our MD110 bc9 to the PSTN over digital line "E1" using a CAS signaling, we use a TLU20 card but what TL signaling we must choose? TL30 or TL37?? please also tell me the difference between them!

Muchas Gracias!
 
I want to add a point: the type of signaling system we want to use is CAS "R1"


 
i made a mistake, the signaling we want is R2 not R1!
 
Hello user25, you should use TL30 for PSTN. Also is important to know if you will need MFC registers, in that case you must also install MFU or MSU/MRU boards. What country are you located?
 
we have installed the MFU card this card is reponsible of register signalling!
the link works well and also i have the ANI (A-number identification) this route is used only for incoming trafic from pstn, it is a did route to our operator consol..

however i've 2 problems now:
1- the consol is OPI-II, where the field responsible of displaying the A-number can display only 6 digits, but in our contry A-number is composed of 9 or 10 digits!!
what is the solution to display all th number???

2-when our register receive th complete A-number he sends a signal A-6! so the PSTN can't have information about the state og B-number.. so normaly our register may send
A-3 signal then B-6 signal if the operator is free, so why this dosn't occure??????

this is a tracing made by PSTN to see by yourselves what exactly occures now:

55940 0000000 IDLE S 0000 1001 H'20 BT2D3-17

4 MINUTES

14660 0018720 R 0000 1001 H'22 BT2D3-17
14660 0000000 SEIZURE S 0000 1000 H'22 BT2D3-17
14720 0000060 R 0000 1011 H'22 BT2D3-17
14740 0000020 GROUP I 10 S 0000 1010 H'1 CSRR2-65
14740 0000000 SEIZURE ACKN. R 0000 1011 H'23 BT2D3-17
14820 0000080 A5 R 0000 0101 H'1 CSRR2-65
14820 0000000 GROUP II 1 S 0000 0001 H'5 CSRR2-65
14990 0000170 A1 R 0000 0001 H'5 CSRR2-65
14990 0000000 GROUP I 2 S 0000 0010 H'1 CSRR2-65
15150 0000160 A1 R 0000 0001 H'1 CSRR2-65
15150 0000000 GROUP I 1 S 0000 0001 H'1 CSRR2-65
15420 0000270 A5 R 0000 0101 H'1 CSRR2-65
15420 0000000 GROUP II 1 S 0000 0001 H'5 CSRR2-65
15590 0000170 A5 R 0000 0101 H'5 CSRR2-65
15590 0000000 GROUP I 10 S 0000 1010 H'7 CSRR2-65
15750 0000160 A5 R 0000 0101 H'7 CSRR2-65
15750 0000000 GROUP I 2 S 0000 0010 H'7 CSRR2-65
15930 0000180 A5 R 0000 0101 H'7 CSRR2-65
15930 0000000 GROUP I 9 S 0000 1001 H'7 CSRR2-65
16100 0000170 A5 R 0000 0101 H'7 CSRR2-65
16100 0000000 GROUP I 9 S 0000 1001 H'7 CSRR2-65
16260 0000160 A5 R 0000 0101 H'7 CSRR2-65
16260 0000000 GROUP I 3 S 0000 0011 H'7 CSRR2-65
16430 0000170 A5 R 0000 0101 H'7 CSRR2-65
16430 0000000 GROUP I 2 S 0000 0010 H'7 CSRR2-65
16590 0000160 A5 R 0000 0101 H'7 CSRR2-65
16600 0000010 GROUP I 7 S 0000 0111 H'7 CSRR2-65
16760 0000160 A5 R 0000 0101 H'7 CSRR2-65
16760 0000000 GROUP I 4 S 0000 0100 H'7 CSRR2-65
16920 0000160 A5 R 0000 0101 H'7 CSRR2-65
16920 0000000 GROUP I 6 S 0000 0110 H'7 CSRR2-65
17100 0000180 A5 R 0000 0101 H'7 CSRR2-65
17100 0000000 GROUP I 15 S 0000 1111 H'1 CSRR2-65
17430 0000330 A6 R 0000 0110 H'1 CSRR2-65
17630 0000200 R 0000 1011 H'2B BT2D3-17
21910 0004280 R 0000 1010 H'2B BT2D3-17
21930 0000020 ANSWER R 0000 1010 H'2D BT2D3-17
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top