I have looked in different threads and think that I know my answer, however, I am still new to some of this. I need to move an analog card to my first cabinet. I have moved all the dns from a digital card to another cabinet. I tried to put an analog card in its place and I got the mismatch error. CS1000 version 4021. Do I need to out the card before I remove the digital? Is there a way to change the database?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Card type does not match the data base
- Thread starter cas1437
- Start date
bhassell2000
Technical User
to out digital card:
ld 20
Req out
type cardmlt
tn x x x
to install new analog card
req new
type cardslt
tn x x x
Thanks,
Buddy
Linked in Profile
ld 20
Req out
type cardmlt
tn x x x
to install new analog card
req new
type cardslt
tn x x x
Thanks,
Buddy
Linked in Profile
- Thread starter
- #3
Buddy,
Thanks for the quick answer. I had seen something along that line on a thread. I had swapped the cards then tried to out. Basically I was unsure of what I was doing and doing things out of order.
This has been a great place to get help.
Thanks again.
Chris
Thanks for the quick answer. I had seen something along that line on a thread. I had swapped the cards then tried to out. Basically I was unsure of what I was doing and doing things out of order.
This has been a great place to get help.
Thanks again.
Chris
bhassell2000
Technical User
Glad we could help, stick around and learn a little and maybe help someone too!
Thanks,
Buddy
Linked in Profile
Thanks,
Buddy
Linked in Profile
- Status
Similar threads
- Locked
- Question