CAR key Assignment

[voippm]

NEWBIE here...

I have assigned several extension to some CAR assignments. I have done this for virtual extensions. some of these users are actually starting to work in the office and so I would like to be able to have them sit at another users desk while they are here, and have their extensions ring as a button lighting up on the phone. I think this is possilbe, but when trying to read the hyrogliphics within the programming manual, I get lost.

Can anyone help?

rob

 

[NECTechDude]

First you have to create some CAR Keys. You can do this by going to memory block 1-2-04. You can only create 4 CAR (SIE) keys at a time. It's a good idea to start your CAR Keys using the last ports (starting from C0) in the system and work your way backwards. Once you created a block of 4 CAR Keys in 1-2-04, go to memory block 4-10 and program extension numbers for these CAR keys.

Now to add these CAR Keys to a phone, go to memory block 4-12 and program these CAR Keys (SIE Keys) on the phone ports that you want them. Be sure that when you program a CAR/SIE Key on a phone you remember what the port# of the CAR/SIE Key was.

To get these CAR/SIE Keys to ring on the phone that you added them to you must go to memory block 4-37 and go to the port of the phone that they are on. You can program the line key that the CAR/SIE Key is on to ring on delay,immediate, or no ring. This memory block 4-37 is for Day Mode ringing. 4-38 is Night Mode ringing.

Probably best to follow along in the manual when reading this. Goto Chapter One Section 3 - System Data List. These pages will help you to get familiar with how the manual is laid out.

 

[geekomatic2002]

Another newbie

This business of CAR keys - does that only apply to certain systems or all. I'm mainly interested in small system programming 120s and the like.