Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Caoprdmn.exe causes high cpu?
- Thread starter klagge
- Start date
What TNG version are you using ? What OS, Service Pack ? We used to have Unicenter 2.2 running on our NT4.0 SP6a servers. Experiencing the same problems, including some Dr. Watsons on caoprdmn.exe the problem was solved by upgrading to TNG 2.4.
Regards,
Ondra
Regards,
Ondra
rahularora
Technical User
Hello There,
For TNG 2.4 you have a patch QO04078, which you can download from the support.ca.com.
If you are on 2.2 have you applied the genlevel 9907?
can not suggest more without knowing your OS and version. Rahul Arora
----------------------------------
What to do we are like this only.
----------------------------------
For TNG 2.4 you have a patch QO04078, which you can download from the support.ca.com.
If you are on 2.2 have you applied the genlevel 9907?
can not suggest more without knowing your OS and version. Rahul Arora
----------------------------------
What to do we are like this only.
----------------------------------
- Thread starter
- #4
rahularora
Technical User
have you enabled the Win 2000 audit options? Please disable them since caoprlog process reads them.
Rahul Arora![[hourglass]](/data/assets/smilies/hourglass.gif "[hourglass] [hourglass]")
----------------------------------
We have not come into the world to be a number; we have been created for a purpose, for great things: To love and be loved.
----------------------------------
Rahul Arora
----------------------------------
We have not come into the world to be a number; we have been created for a purpose, for great things: To love and be loved.
----------------------------------
Open caugui settings - goto Client Prefs, event management and change the <b>max # of threads</b> from 128 to 512.
Its just down to the number of messages it is processing. If you have common messages that all have actions on them, then this will happen.
Get rid of all the junk from the console, and stop things like unecessary raw traps from getting through by removing them at source (catrapd) by changing the tng/caiuser/catrapd.cfg file.
Its just down to the number of messages it is processing. If you have common messages that all have actions on them, then this will happen.
Get rid of all the junk from the console, and stop things like unecessary raw traps from getting through by removing them at source (catrapd) by changing the tng/caiuser/catrapd.cfg file.
- Status
