Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Can't swap phones on Meridian telephone system. 1

Status
Not open for further replies.

G1Alex304

IS-IT--Management
Dec 30, 2009
11
US
successfully swapped lines before. but getting a "SCH8787" error with a specific extension. Any help would be appreciated. New at this, so not very familiar with the lingo.

Thanks,

Alex
 
I don't see that error message in the NTP's at all. Are you sre it is 8787 ???
 
Yes...checked it twice. I think it has something to do with "monitoring" but i'm not sure what that is.
 
if it is a monitoring error -I do not see either

Print TNs of phones to move

If either has key 0 as ACD - don't move stop and rebuild

If either has a TN listed as:
CLS CTD FBD WTA LPR PUD MTD FNA HTA TDD HFA GRLA CRPD STSD
MWA LMPN RMMD SMWD AAD IMD XHD IRA NID OLA VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWD LNA CNDA
CFTD SFA MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDD CDMD LLCN MCTD CLBD AUTU
GPUA DPUA DNDA CFXA ARHA FITD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AGRD MOAD
AHA DDGA NAMA
DRDD EXR0
USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC DNDY DNO3 MCBN

CPND_LANG ENG
RCO 0
[highlight #FCE94F]BFTN 005 0 00 01[/highlight]
HUNT 5888
LHK 1


remove the BFS key from the TN listed and then you can move phone ok
When you put the BFS key back remember DN now has a new TN - use the new TN
 
Printed 2 TNB to compare and this is what I got. Not even sure if this is what you are looking for. Hope this helps. Instead of retyping all...i'm going to just enter what is different. Let me know if you need more.

FDN 3233 (this is a different extension in a nearby cubicle)
.
.
.
BFTN 008 0 01 00
HUNT 000
.
.
.
KEY....
.
.
.
16 MWK 3233
.
19 CFW 16 5533
.
23 SCC 0074

Thanks!
 
Ok...i will remove BFS. I am very new to this system....what command do I use. Thanks!
 
ld 11
req: prt
typr: tnb
TN: 8 0 1 0

Look for key with BFS with TN from phone you want to move


req:chg
type: 3904
TN: 8 0 1 0
key xx nul <-- were xx is key you found in above step
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top