Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Can't see Voicemail on UC module 2

Status
Not open for further replies.

JayNEC

IS-IT--Management
Jun 5, 2002
942
US
This is a lab system, and it's running 9.1.
System status can see the UC module status and it's booted and running. It's pingable and can web browse to it and ONex Portal is working.

BUT!
In system status under Voicemail - Voicemail type is "none"
The IPO is set to "Voicemail Pro on UC module" and has the correct IP address showing in Manager.

I've defaulted the IP500, put the licenses back and I'm seeing the same thing still.

Any thoughts?


New England Communications
 
Have you compleated the ignition process?
is the VMPro Daemon started?


A Maintenance contract is essential, not a Luxury.
Do things on the cheap & it will cost you dear
 
Yeah, all that had been done.

I tried pointing the IPO to a windows based Voicemail Pro. That had the same symptoms.

I defaulted the security settings, and it works now.

New England Communications
 
that is probably the VM password in the unsecured interfaces (it has caught me a couple of times as well :) )

A Maintenance contract is essential, not a Luxury.
Do things on the cheap & it will cost you dear
 
Yep, this is for sure the password settings on 9.1

9.1 has a lot of security enhancements which the voicemail password is one of them.
Lately i upgraded a system to 9.1 where i already upgraded voicemail pro in front.
After the upgrade voicemail did not work and i had to wait until the file upload was done.
It needed 3900 files so it took a long time.
So i canceled that and first did a security reset and then did the file upload again.


BAZINGA!

I'm not insane, my mother had me tested!

 
Check your Unified Communication Status in Status Monitor
 
Peter said:
So I cancelled that and first did a security reset and then did the file upload again.

You can also open a second instance of Manager to access the IPO and do merge changes while the first instance does the upload.

Kind regards

Gunnar
______________________________________
Mille viae ducunt homines per saecula Romam

2cnvimggcac8ua2fg.jpg
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top