Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cant Ping CallPilot server

Status
Not open for further replies.

thattekguy

Vendor
Feb 2, 2007
432
US
I have a 703t rls 3 callpilot that seems to be working ok, but I can not ping into it on the elan or the clan. I am able to ping everything on the elan and clan from the 703t. I can not ping the elan on the callpilot from the pbx but yet it's working. This is very strange to me and I don't think I've came accross this one before. I stopped IPSEC and re started it, then re booted but still cant ping or access CP manager. Any ideas? It has the latest Peps, just not the microsoft hot fixes. Thanks.
 
This may sound funny, but run a dummy config wizard. Just run through keeping all the information intact, and skip languages. See if the NIC cards need to be kicked.
 
Tried that before the languages, thanks though. I tell ya, this is a tricky one.
 
Silly suggestions but:

1: Have you got your Elan and Clans reversed on the CP?

2: Firewall maybe??
 
Did'nt check the firewall yet. I did unplug my elan cable from the back of the server and my elan disabled on the pbx. I thought the bindings might have swapped during the pep upgrade but that doesnt seem to be the case. Strange..
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top