Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Can't ping BCM 50 after reboot

Status
Not open for further replies.
McKnight

McKnight

MIS
Apr 15, 2005
2
0
0
CA
I'm working on a BCM50 and after I rebooted it I can no longer ping it or manage it. The phones associated with it are working.
The BCM is plugged into a Nortel 4550 48pwr switch.

Any ideas?
 
Sort by date Sort by votes
Are you connected to the OAM port? Does it gives you an ip adress?
 
Upvote 0 Downvote
Yes, I am connected to the OAM port. I was able to ping and manage before the reboot.

McKnight
 
Upvote 0 Downvote
before you plugged the BCM into your network, did you disable the DHCP server on the BCM?
 
Upvote 0 Downvote
when you are connected to the oam port, check to see if your pc resolves a ip address from the bcm dhcp server. if it doesn't, set your ip to static "10.10.11.2" then try to ping. if you get in check your service manager to see if some services have stopped. if they have you can try to restart them but Nortel warns all techs to consult a Nortel enginneer before doing so.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

bluemr2
  • Question
BCM 50 R6 Patches
Replies
3
Views
238
TLDuk
TLDuk
jsaad
  • Locked
  • Question
BCM 50 cycling 1
Replies
12
Views
120
ucxguy
ucxguy
Firebird Scrambler
  • Locked
  • Question
BCM 50 / 450 CDR live client query on port used? 1
Replies
3
Views
62
Firebird Scrambler
Firebird Scrambler
telllman
  • Locked
  • Question
BCM 50 VICEMAIL ISSUE
Replies
5
Views
77
curlycord
curlycord
gberger
  • Locked
  • Question
Bcm50 R6 stuck in boot after AC power loss
Replies
5
Views
141
curlycord
curlycord

Part and Inventory Search

Sponsor

Back
Top