Hello all,
I am attempting to add our company logo as a screensaver on a 9621G. I believe I have all of the necessary settings and I noticed that the file is loading on the phone but after a minute I still see the default Avaya logo. What am I doing wrong. Here is my 46xx setting file.
## SCREENSAVERON specifies the number of minutes of idle time after which the screen saver will be displayed.
## If an image file has been downloaded based on the SCREENSAVER parameter, it will be used as the screen saver.
## Otherwise, the built-in Avaya one-X(TM) screen saver will be used.
## Valid values are 0 through 999; the default value is 240 (4 hours).
## A value of 0 means that the screen saver will not be displayed automatically when the phone is idle.
## This parameter is supported by:
## 96x1 H.323 R6.0 and later
## 96x1 SIP R6.0 and later
## 96x0 H.323 R1.0 and later, but not supported by the 9610
## 96x0 SIP R1.0 and later
SET SCREENSAVERON 1
##
## SCREENSAVER specifies the filename of a JPEG image to be used as a customized screen saver.
## Valid values are 0 through 32 ASCII characters; the default value is null ("").
## 96x1 H.323 R6.0 and later
## 96x0 H.323 R2.0 and later, but not supported by the 9610
SET SCREENSAVER filename Logo.jpg
##
Any help would be appreciated
I am attempting to add our company logo as a screensaver on a 9621G. I believe I have all of the necessary settings and I noticed that the file is loading on the phone but after a minute I still see the default Avaya logo. What am I doing wrong. Here is my 46xx setting file.
## SCREENSAVERON specifies the number of minutes of idle time after which the screen saver will be displayed.
## If an image file has been downloaded based on the SCREENSAVER parameter, it will be used as the screen saver.
## Otherwise, the built-in Avaya one-X(TM) screen saver will be used.
## Valid values are 0 through 999; the default value is 240 (4 hours).
## A value of 0 means that the screen saver will not be displayed automatically when the phone is idle.
## This parameter is supported by:
## 96x1 H.323 R6.0 and later
## 96x1 SIP R6.0 and later
## 96x0 H.323 R1.0 and later, but not supported by the 9610
## 96x0 SIP R1.0 and later
SET SCREENSAVERON 1
##
## SCREENSAVER specifies the filename of a JPEG image to be used as a customized screen saver.
## Valid values are 0 through 32 ASCII characters; the default value is null ("").
## 96x1 H.323 R6.0 and later
## 96x0 H.323 R2.0 and later, but not supported by the 9610
SET SCREENSAVER filename Logo.jpg
##
Any help would be appreciated