Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

can't get Harddrive to work!! 2

Status
Not open for further replies.

Shades997

Technical User
Mar 3, 2005
16
US
After upgrading my motherboard and case, the harddrive keeps looping.
When you boot up, it then goes through the start up cycle, then stops and asks if you want to enter
Microsoft Windows XP Home Edition or Microsoft Windows, when you chose Microsoft Windows XP Home Edition, it comes up with, "We applogise for the inconvenience. but windows did not start correctly, then when you scroll down, then gives you the option;
Safe Mode
Safe Mode with Networking
Safe Mode with Command Propt
Last known Good Configuration
Start Window Normally"

What ever you press, it always goes back to the start of startup.

I tried using my spare 20gb drive, and installing windows XP, but all i got was "NTLDR is Missing"



Please can anybody out there help me?

Shane
 
Set first device in the bios to CDrom, place a copy of XP in the rom drive boot up, it should find the XP before it tries to boot from the hard drive. (bootlooping down to old config on new setup)
Re-install Windows
Martin

We like members to GIVE and not just TAKE.
Participate and help others.
 
thank you paparazi, by doing this, will it keep my data on the drive and not be lost?
 
just reset the first boot in BIO'S to CDrom, but still the same thing happens when l reinstalled my win xp disk (just bootlooping)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top