Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Can't get EDC to Authorize .req files

Status
Not open for further replies.

triphoss

Technical User
May 8, 2005
10
0
0
US
After having my terminals mock transactions about a year ago and not send them to edc I thought I had learned how to do this. I followed the information from my original post again
thread693-1056815
then I tried this post
thread693-1232226

And the transactions are still not getting to EDC First I deleted the spooling file and nothing changed. Next I moved the .spl files from my term1 to alohaboh edc and renamed them to .req and nothing will happen. I tried going to services starting and stopping. Rebooted the system. Tried all the advice I found but no luck. The files are sitting in the edc folder. Any help would be great
 
Sorry forgot this in the original post the reason it spooled was I spilled water on the modem and switched it out for a new one. And all cc transactions since are going through fine it is only the cards run before I switched modems and deleted the spooling file that I can't get to authorize
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top