Can't find project or library

[robinsql]

Hi all,

When I try to run my program, it gives me this error. It used to run fine and I would have guessed that it is missing references, but it appears not to be.
It hangs on the trim function, and if I remove that, on the comRTS of the comm control.

Anyone any ideas what this is?

Thanks for any help,
Robin

 

[AndyWatt]

If you look in Projects \ References is anything marked "MISSING"? Or have you missed adding a component?

Andy
"Logic is invincible because in order to combat logic it is necessary to use logic." -- Pierre Boutroux
"A computer program does what you tell it to do, not what you want it to do." -- Greer's Third Law

 

[robinsql]

Hi,
The only thing that has a missing reference is Package and Deployment wizard. This shouldn't affect it though as I'm running from the code.

Or does it?

 

[AndyWatt]

I had a similar problem when I lost the reference in Components to Common Controls 2 (the one with the listview) this caused a similar error, claiming Str or similar was unrecognised.

If its missing a reference to P&D wizard and the program needs it then I would suggest adding it.

Andy
"Logic is invincible because in order to combat logic it is necessary to use logic." -- Pierre Boutroux
"A computer program does what you tell it to do, not what you want it to do." -- Greer's Third Law

 

[robinsql]

Hi again,

If I open the same project on another PC, it runs fine. Does that make a difference? If it's missing a ref in the project on one machine, it would miss it on another, wouldn't it?

 

[robinsql]

Hi,
I restored the pdaddin.dll reference and it worked.
Cheers.