Can't do both External Call Transfer in Voice Mail and Ext. Msg Notify

[killowattkid]

I have recently installed a BCM450. They use the the old school Centrex "External Call Transfer" in their Voice Mail to transfer callers on analog CO Lines. I set the Outbound to be POOL 7 (a non-existant Pool). I set the string to be #P1xxx-xxx-xxxxP. This works perfectly by Flashing and transfering the caller.

My problem is they now want Voice Mail Message Notification to a cell phone. I already have the OUTBOUND set to this non-existant pool. How do I setup the ability to do both the External Call Transfer and the Cell Phone message notification?

 

[ironhorse17]

The situation is different the caller has disconnected so no line to link on. The message is delivered using a free line in the system to you must configure to use.

 

[killowattkid]

To Clarify, you only have ONE choice in the mailbox setup for both message notification and transfer. That is the problem. I have it set to Pool 7 to support the LINK (flash) capability on the transfer. There is no Pool 7 to select a line to send a message notification.