Can't disable DCH on Option 61C

[jdm5000]

I've got a PRI Loop with all the ports in MBSY state and no alarm. I'm trying to disable the associated DCH so I can disl/enll the PRI loop to see if it comes back up.

When I try to disable the DCH, nothing happens. No error message, nothing. STAT DCH still shows:
DCH 000 : OPER AEST AUTO DES : LOCAL-SWBL-12

Is there a way to force it down?

 

[hawks]

What happens if you try to enable it then try disable?

 

[trvlr1]

So we are not making incorrect assumptions, in what load are you trying to disable the DCH and what command are you using?

 

[jdm5000]

LD 96
DIS DCH 0


When I try to enable it, I get:

ENL DCH 0
DCH039

err dch039
Invalid DCH state for enabling the link.

Severity: Info

 

[StanleySteamer]

Try
DIS AUTO 0
then
DIS DCH 0

 

[jdm5000]

Well...

That worked to get it disabled. Now when I try to re-enable it, I get:

DCH: - DISABLE INDICATION TIME: 12:44:16
REASON - **(00000086 )

 

[hawks]

If it's a TMDI then I would do a download on it.

 

[jdm5000]

Do you have the LD and the command for that?

 

[StanleySteamer]

You may also need to
ENL AUTO

 

[hawks]

LD 96 is also for the TMDI commands

 

[bhassell2000]

ld 96
stat tmdi

ld 96
dis tmdi x x = tmdi number

ld 96
enl tmdi x fdl x = tmdi number

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell