Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Can't connect to a Cisco VPN through WatchGuard Firewall

Status
Not open for further replies.

kg00se

IS-IT--Management
Mar 2, 2006
56
US
I have a watchguard Core x750e Firewall and I am trying to connect to a clients network. they are using a Cisco Pix.

I am using the Cisco VPN Client version 4.8.02.0010.

I can get connected to the vpn but unable to ping any internal IP Address's on the clients network. I know this is a configuration with the Watchguard. if anyone can shed some light I what I am doing wrong or how to fix this that would be great.

I created a rule to allow tcp port 51, udp ports 1000,4500, and 10000. yet I still can't access the network

any thoughts would be great.

Kevin
 
could try allowing outbound the pre-defined watchguard policy "IPSEC" as well
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top