Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Can't call Local numbers on PRI

Status
Not open for further replies.

tdcurt

IS-IT--Management
Mar 7, 2010
38
US
Hi all,we just set up new Pri.We can call long distant but not local,we dial 10 digits here for local calls in las vegas,702-XXX-XXXX telco says first digit drops (7) when i call out.7.1 sw rec digits are 4 dial plan set to 10.any help would be great.Thanks
 
rec digits are 4 dial plan set to 10"
That is for inbound

Make sure the the DN Length default is set to 10, often its at 7

________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.

=----(((((((((()----=

small-logo-sig.png

Toronto Canada
 
I mean in your case it would/might be 9.


________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.

=----(((((((((()----=

small-logo-sig.png

Toronto Canada
 
I am headed out there this morning i think i have it set to 10 will check and repost!
Thank you
 
Tried dn lenght 9 and 10 still can't dial local numbers .any suggestions??
Thanks
 
If you monitor the D Channel, can you see the call attempts hitting it? If they are, is the string what the Telco requires to route the call?
 
yes,they see the first digit 7 being stripped
thanks
 
Does Monitor show the dest code? i.e 9702-XXX-XXXX

________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.

=----(((((((((()----=

small-logo-sig.png

Toronto Canada
 
If I remember right, you have to enter your local are code in the dialing plan and change it to ten digits instead of the 3 digits which is default.
 
Well 7 is default but he already tried 10 it appears above.

________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.

=----(((((((((()----=

small-logo-sig.png

Toronto Canada
 
dest code should have been 01,I had absorb all.works fine I really want to thank all of you very much!!!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top