Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

can't access network resources

Status
Not open for further replies.

wjc

MIS
Dec 20, 2002
9
GB
I'm running windows 98 clients on a netware 5 network.
My problem is that with more than six connections, the
clients show no space available on any of the network volumes or mapped drives. The first six connections work fine, but anything after that shows no available space in windows explorer properties. Users can login but can't access any network data or applications. My server utilizes hardware RAID5 and runs Backup Exec. Other than that it's pretty standard. Oh yea, the server reflects plenty of space on all volumes, viewed in nwadmin and volume monitor at the server. There have been no recent changes to the network, this just seemed to happen over night?? So far I'm at a loss, any help would be greatly appreciated. Thanks.
 
What version of the Novell client are you running? I take it your server has enough licenses installed also? -----------------------------------------------------
"It's true, its damn true!"
-----------------------------------------------------
 
I'm running Novell client v3.3. I'm assuming all licenses are current, but not sure how to check. Do licenses expire? I was able to achieve more than six connections prior to this so I know the licenses were installed. Thanks again for your response.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top