Can't access Internet

[paguy]

I'm new to WG products. I can't access the internet through my fb 700. I set the ip address, gateway and dns addresses and I'm still unable to get out. I have the trusted set to 10.1.10.x.

 

[Ntr0P]

If you've changed the default rule to limit outbound access, make sure you have a rule for http and DNS. Otherwise, what are your logs telling you?

 

[CrazyCol]

I had a problem similar to this. I have a watchguard firebox III 700 which was connected to a cayman router configured as a bridge. Everything looked right on the firebox and should have been working but I couldn't get out. The problem was I need to place a hub between the firebox and the router as there was some type of communication problem. Once I put the hub between the firebox and the router it all worked really sweet.

Hopefullly this may help

Cheers

 

[reepa]

Under network and nat remove the dynamic nat entries, but leave the box ticked to enable dynamic nat.