kdwalker32
MIS
My company switched from a T1/cisco 1600 setup to a cable modem/PIX 501 setup.
Since installing this new connection, we can no longer access our internal web server from inside, but have no problem accessing it from outside the network. There is no problem accessing other web sites, just our internal one. Also, we cannot ping any outside IP address or FCDN. I even tried explicitly allowing ICMP full access from inside interface, but no change. We are using NAT, with static IP mappings for our internal email & web server.
I have been working with Cisco TAC, and emailed them my config, and they can't see anything wrong with it. I'm clueless. Can someone help?
Thanks,
Kevin
Since installing this new connection, we can no longer access our internal web server from inside, but have no problem accessing it from outside the network. There is no problem accessing other web sites, just our internal one. Also, we cannot ping any outside IP address or FCDN. I even tried explicitly allowing ICMP full access from inside interface, but no change. We are using NAT, with static IP mappings for our internal email & web server.
I have been working with Cisco TAC, and emailed them my config, and they can't see anything wrong with it. I'm clueless. Can someone help?
Thanks,
Kevin