I am having problems with my 1760 router which got a rommon prompt upon rebooted. And I tried to upload a backup image using xmodem from a PC. And it was accidentally disconnected during the transfer progress. And since after than I cannot type anything at the rommon prompt to download the image again. I can still see the rommon prompt now but I cannot type anything there. Ctrl+Break works but cannot type anything. Would be very much appreciated for any helps.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Westi on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
cannot type anything in rommon
- Thread starter tyroon
- Start date
- Thread starter
- #2
Please discard the post. It wasn't a problem actually. The SCROLL LOCK was accidentally on and I cannot type anything.
I could set the IP_ADDRESS, IP_SUBNET_MASK, DEFAULT_GATEWAY, TFTP_SERVER, TFTP_FILE values and issue tftpdnld command. The image is downloaded and the file is copied to flash.
I could set the IP_ADDRESS, IP_SUBNET_MASK, DEFAULT_GATEWAY, TFTP_SERVER, TFTP_FILE values and issue tftpdnld command. The image is downloaded and the file is copied to flash.
- Status
Similar threads
- Locked
- Question
