Cannot transfer call from cs1000 IP Set to Bcm phone via IP trunks.

[broncos1112]

Here is scenario. Incoming call to Ext #1511 via PRI Did trunks. X1511 is an IPset (1230 type). Try to xfer call to other ext #1504 which is a 7208 type phone off of BCM 200. IP trunking involved. CS1000 Pbx is the main site with media gateways, Opt 11, and bcm 200 and bcm 400 tied together via ip trunks. Cannot release the transferred call to the bcm phone. Can call it normally and converse no problem. Have put latest patches in bcm. Checked TAT and TRO on both Pbx and Bcm. Ncos and Tgar do not appear to be an issue. The phones are in the same office. One is IP the other connected to BCM. Any ideas anyone?? Thanks

 

[Jeffnortel]

Setup a call between to ext on the cs1000 and try and transfer without the did trunk involved. Try changing the EOD and ODT timer on the ip trunk route to 4000.

 

[broncos1112]

Adjusted timers. Also took inc. DID calls out of the equation. Could not transfer an internal call from BCM phone to IP phone to BCM phone. Any other ideas anyone?