Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cannot remove DTI2

Status
Not open for further replies.

mszodiac

Technical User
Jun 18, 2012
14
CA
Hi Everyone,
We've recently converted a remote site from DTI2 to PRI2. It's an Option 11 running 3.5 -yes it old :), but will be upgraded soon.

I'm doing the clean up, but I cannot remove the DTI2 from CEQU. Here's what I've done:

-disable loop (loop 2)
-remove TNs
-remove route

From LD 17
REQ chg
TYPE cequ
DTI2 x2

SCH0564
DTI2 !
>err sch0564

SCH0564
Attempt to remove a loop with data still on it.

Any idea as to what data is still referenced with loop 2? Thank you.
 
Thanks bhassell2000. You're absolutely right! There were TNs remaining loop 2. I got fooled by the labeling though the TN was pretty obvious! I deleted the TN, and was able to delete the loop.

TKTP COT
ROUT 1
DES
TN 002 19 MBER 1 COT IAO
TN 002 20 MBER 2 COT IAO
TN 002 21 MBER 3 COT IAO
TN 002 22 MBER 4 COT IAO
TN 002 23 MBER 5 COT IAO
TN 002 24 MBER 6 COT IAO
TN 002 25 MBER 7 COT IAO
TN 002 26 MBER 8 COT IAO
TN 002 27 MBER 9 COT IAO
TN 002 28 MBER 10 COT IAO
TN 002 29 MBER 11 COT IAO
TN 002 30 MBER 12 COT IAO

DES COT IAO
TN 002 29
TYPE COT
CUST 0
TRK DTI2
SICA 1
PDCA 1
PCML A
NCOS 4
RTMB 1 11
NITE
AST NO
IAPG 0
CLS UNR DTN WTA LPR APN THFD
P10
TKID
DATE 18 OCT 2005
REQ
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top