cannot login to system cs 1000

[175one75ive]

I can login to the system but not connected and it appears bug n failure. it happen after power failure. what should i do? thanks

 

[ramsay]

What release is it and do you have PDT access?

Ramsay

 

[Firebird Scrambler]

Is your system a dual processor and are you on the inactive core?

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website =

http://somertel.myfreesites.net

linkedin

 

[tbonz25]

It looks like memory corruption. I agree with the above would need to know what release and what type of processor. The easiest thing might be to do an INIT of the system.

 

[KCFLHRC]

Maybe this solution, see below


avaya-logo
Subscribe Subscribe Printer Friendly Version Printable version Email Email
CS1000 Any Release: RPT: enqueue report failed: cat=5, num=9
Rate Content Rate this Page

Doc ID: SOLN167525
Version: 5.0
Status: Published
Published date: 15 Jul 2010
Updated: 25 Aug 2015
Author:
Content Migrator

Details

Cannot backup

Offline core cannot boot into service



Problem Clarification
Can't archive or do a "BKO" to PCMCIA or FMD
Error when trying to archive
Error: CAN'T OPEN INSTALL.LST
RPT: enqueue report failed: cat=1, num=23
RPT: enqueue report failed: cat 1, num=107
Offline core keeps rebooting with scrolling enqueue messages


Cause

Corrupted software on FMD or SWDB
Solution

Repartition SWDB or FMD and reinstall software




Legacy ID
KB90034055

 

[MossEng]

I had same issue on an Option 11C about a month ago, the software daughterboard was corrupted, replacing DB, re-installing software and a backup resolved issue. Don't reboot system as the one I worked on did not come back up, when I subsequently
tested the corrupted DB in the lab.

 

[175one75ive]

tanks to all for helping