Cannot locate number in ASA

[JPidliskey]

I was looking for an open number in my system I thought I found one, but the system states "Extension exists but assigned a different object" I can't seem to find where this number is located.

 

[kyle555]

list usage extension?

 

[gnesvik]

Try 'list extension-type xxxx'

 

[JPidliskey]

Neither worked. Just weird I can't seem to find this number, although it exits. When you call it, You just get dial tone, like it is for some sort of DISA.

 

[kyle555]

display remote-access?

 

[Sean655]

Call it.

 

[JPidliskey]

I tried "display remote-access" There is only one number listed. Not the one I'm looking for. I'm surprized they have that programmed.

 

[bignose21]

list trace the station you are calling from do you see where its heading?

 

[NewNic]

change console x and look at "common shared extensions

 

[letman2]

List aar analysis

 

[JPidliskey]

Thanks! I'm not sure about the "change console x and look at "common shared extensions"". I'll try the LIST AAR ANALYSIS.

 

[ZeroZeroOne]

Try looking in your Dial Plan Analysis to make sure that specific number wasn't set up for something unique such as a Dial Access or Feature Access Code.
Next, look at Dial Plan Parameters to see if your system is set for UDP first or Local-Extension First. If UDP first, Display the uniform dial plan and look for that extension. Perhaps it is set for something other than ext.

 

[Kombucha]

It would likely be a VDN.

 

[JefferP]

Look on pg2 of 'display system-parameters maintenance' and see if your extension is there.

We're all ignorant, just in different subjects.