Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Cannot inrease var filesystem 1
- Thread starter mar3i
- Start date
iggsterman
Technical User
Because you do not have enough room on the volume group. Increase the underlying VG and then try again.
-
1
- #3
As iggsterman responded, you do not have enough available space.
Run lsvg rootvg and look for FREE PPs. You will see that you do not have enough to fulfill your request. You need to add another hdisk with extendvg or if you are using SAN storage you can simply increase the existing LUN size followed by chvg -g rootvg (g=grow). Then, you should be able to add space to the /var filesystem.
Run lsvg rootvg and look for FREE PPs. You will see that you do not have enough to fulfill your request. You need to add another hdisk with extendvg or if you are using SAN storage you can simply increase the existing LUN size followed by chvg -g rootvg (g=grow). Then, you should be able to add space to the /var filesystem.
- Status
Similar threads
- Locked
- Question