I have a bcm 400 & installed su 22 service update now I have certain ext's that populated an E "2100E" after the ext. #. These are T7316 sets.I can call outbound via t-1 trunks & make interanal calls from the sets with an E after them,however from other ext's that are in normal operation I cannot call the sets with an E... The bcm populated the ext's with an E to the bottom of the active set list...
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Westi on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Cannot certain extensions internally
- Thread starter exclimber
- Start date
- Thread starter
- #2
oldestgeek
Technical User
I believe the e means database error so you may have a corrupt data base. Try to remove the patch that caused the problem and reboot. If that fixes that issue, reinstall all patches, making sure you're doing it in the correct order.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question