cannot backup announcements to memory card 2

[MatthewM]

I have a two cabinet Definity G3 PBX with a network control card (TN777B) in cabinet "A" that allows me to insert a memory card for backing up translations and announcements. I just recently installed a TN750C announcement board in cabinet "B". Upon running the command "sav ann from 01B13", I get an error stating "required announcement data moduel not administered." Does this mean I have to install the new announcement board in cabinet "A" to be able to backup the announcements to a memory card?

Any help would be greatly appreciated!

 

[Phoneman2]

Have you gone in and set up the ann. card yet? Do you have any ann. on the card? Wisdom is Knowledge
that is Shared

Thanks All Phoneman2

 

[Callmaster]

Hi Matthew

If wou use an TN750C Board you don´t need to backup the announcements, because the board saves the announcement by himself onboard.

But for a security backup, you must administer an data modul with Type announcement, for example:

add data next or xxx for extension

Data Extension: ext:9991 Name: ann 01a10
Type: announcement COS: 1
Board: 01A10 COR: 1
ITC: unrestricted TN: 1


board: is the location from the announcement board in the definity carrier

and then you can save the announcement´s

Have Fun !

Callmaster

 

[MatthewM]

Thanks fellas. I used the "add data next" command. I am now able to save the announcements to a memory card (for off site storage).

 

[alber]

You had to add a virtual data module for the announcement board, it´s necessary for making save announcements.And my friend upon, you had to administer save announcement, cause it´s not automated

Cheers

 

[Callmaster]

Hi Alber,

take a look at the documentation for a TN750C Announcement Board.

Bye Have Fun !

Callmaster