bicyleman9008
IS-IT--Management
- May 19, 2005
- 30
Two PCs, both running PCAnywhere 11.
Host is at IP 10.1.1.97, subnet 255.0.0.0
TCP Port is 5641 and UDP Port is 5642, though I don't know if this matters when running inside a LAN.
Remote is at 10.1.1.2 subnet 255.0.0.0
Ports are also set to 5641 and 5642.
When I try to connect I cannot see the host.
I also tried IP 10.1.1.255 for scanning, without luck.
The HOST is waiting for connection at 10.1.1.97
I cannot figure out what is wrong.
I should at least get a login screen or an error message.
I just get time out.
Host is at IP 10.1.1.97, subnet 255.0.0.0
TCP Port is 5641 and UDP Port is 5642, though I don't know if this matters when running inside a LAN.
Remote is at 10.1.1.2 subnet 255.0.0.0
Ports are also set to 5641 and 5642.
When I try to connect I cannot see the host.
I also tried IP 10.1.1.255 for scanning, without luck.
The HOST is waiting for connection at 10.1.1.97
I cannot figure out what is wrong.
I should at least get a login screen or an error message.
I just get time out.