Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Can you perform a DN pickup from a 2250 console

Status
Not open for further replies.

Dcbtek

Technical User
Jul 9, 2013
9
US
Customer has night bell hooked to an analog port on Option 11. All phones in facility can pickup up bell by dailing 195 plus bell ext 7879. Customer wants 2250 console to be able to pickup calls coming in on night bell. Is this possible?
 
Should be possible. Get an idle loop key and dial 195 plus 7879. 1 is probably your spre code. She mah have to hit the EES key after the 195
 
All of the Pickup feature variations apply to stations only. An M2250 is not considered a station.

~~
Gene at GHTROUT.com
 
Tried the End to End Signaling after SPRE code (Fast Busy). I figured that the 2250 would not be able to pickup station calls but wanted to check.

Thanks
 
Yep, sorry about that. Just looked through the Console Guide and nothing in there about picking up station calls. I suppose an alternative would be to set a phone up there beside her console and let her use that for calls.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top