Can you identify the D (number of digits) parameter for a hotline from a printout on a digital phone

[nscripta]

I am developing a vb.net app for programming keys on digital feature phones (we don't have MAT or similar). I can populate my textbox controls with the key contents however need to know the number of digits for the D parameter on hotlines. Is there any method to obtain this parameter or do you need to work out what codes are in use to determine the number of digits to be expected.
The aim of the app is to store the key mapping to a file so that it be transmitted to the switch to configure the respective extension as required.

nscripta

 

[Splic3d]

I think you need to go with the number of digits in the codes. When programming the keys you have to input the number of digits, but when reading the TN print out it doesn't indicate the "D" portion of the key programming.

http://www.i3techgroup.com

Avaya/Nortel/NEC/Asterisk/Access Control/CCTV/DSX/Acti/UCx

 

[Southpaw46]

This is one of our hot phones
XLST 0
SCI 0
SCPW
CLS FRE DTN FBD XFA WTA THFD FNA HTA ONS
LPR XRA AGRD CWD SWD PUA MWD RMMD LPD XHD SLKD CCSD LND TVD
CFTD SFD MRD C6D CNID CLBD AUTU
ICDA CDMD LLCN EHTA MCTD
GPUA DPUA CFXD ARHA OVDD AGTD CLTD LDTD ASCD SDND
MBXD CPFA CPTA DDGA NAMA MIND
MCRD
EXR0 SHL ABDD CFHD DNDY DNO3
CWND USMD USRD BNRD OCBD RTDD RBDD RBHD FAXD CNUD CNAD PGND FTTC
CDMR PRED MCDD T87D SBMD PKCH MPTD ELCD
RCO 0
PLEV 02
PUID
UPWD
AACS NO
MLWU_LANG 0
FTR FDN 7427
FTR HOT D 5 69216
DATE 13 DEC 2007

 

[Splic3d]

My bad - the "D" is standing for Dial, the next digit is for the number of digits, then the DN you are dialing.

http://www.i3techgroup.com

Avaya/Nortel/NEC/Asterisk/Access Control/CCTV/DSX/Acti/UCx