can you change settings that appear in the autogenerated 46xxsettings file? J179 no Craft access 2

[Binkoba]

IP Office Server Edition V11.1

Can you change anything in the system that will make changes to the autogenerated settings file, or if you want something different you must replace the file with your own?

I have a J179 that will not allow access to the craft menus.

Autogenerated file has SET PROCSTAT 0, but no PROCPSWD.

Thanks


IP Office Server Edition 11.1 (Virtualized) 400 users
Silverpeak Edge Connect Hybrid WAN
30 Sites

 

[JayNEC]

https://ipofficekb.avaya.com/busine...gedProjects/sipphoneinst/46xxspecials_txt.htm

create a 46xxspecials.txt with the settings you want to add or override. follows the same format as the original file, you can use groups etc.

New England Communications

http://www.necomm.com

 

[sizbut]

Many of the settings in the autogenerated file are changed to match settings in the IP Office configuration. In this case, you can set the value you want used as the PROCPSWD by adding a NoUser Source Number.

Stuck in a never ending cycle of file copying.