Can someone help me with adding a loop as a phantom 1

[Kumanj]

I am trying to add a phantom loop on loop 96. I have an option 61c. Can someone walk me through the commands to add a phantom loop. I need it to be phantom 500 type ports

 

[johnpoole]

To create a phantom loop go to LD 97
New
SUPL N0 - 156 -- I normally try to go with the highest possible loop

Carrige return on through do an EDD and your done.


i would not use 96 unless i had to, i perfer the highest possible loop, if you may need 96 one day and you can bump it up to the highest loop

john poole
bellsouth business
columbia,sc

 

[Kumanj]

In ld 97 . Does not respond to command new

This is what I see when I type prt, supl

REQ prt
TYPE supl
SUPL

SUPL SUPT SLOT XPEC0 XPEC1

004 STD LEFT 01 0 3 02 0 3

 

[Reusser]

LD 97
Req: Chg
type: SUPL
SUPL: n96 <-- n156 If I wanted to use loop 156

thats it, you can now use 96 0 0 0 through 96 1 15 15 for phantom TNs


Using 156 as mentioned above is a good idea

 

[Kumanj]

Thank you, That worked. Once I chg SUPL n96
I go to LD 97 and it shows up as a phantom.

Still does not show as available TN in ld 20
LUVU,

Once I build a 500 set with one of the phantom TN's it shows up.

WORKED PERFECTLY

THANK YOU!!!!!!!!!!!