Hi everyone, I have a weird problem and it's driving me nuts.. here's the situation :
I have a Rogers Cable connection and I have a Linksys BEFSR41 router with 3 computers connected to it. These 3 computers work fine, they can access internet and each other with no problem (2 Win98 and 1 win2000)
The problem started when I tried adding a 4th computer (Win 98) a few days ago, no matter what I tried... I couldn't get IE to open a web page on this machine. I've tried the ip addresses only (64.etc , 192.168.1.1 (the router's ip) and nothing happens... Ie just says Cannot open search page, or page cannot be displayed.
The funny thing is, I can release and renew IP's everytime, and under DHCP Client Table in the router admin, the machine is already assigned an IP. I can also ping the numeric IP addresses fine (I've tried the gateway (192.168.1.1), yahoo's (64.xx.something), rogers (24.something) etc and they all give ping replies), but if I try ping etc it just gives me unknown host.
I can also see all the other computers in network neighbourhood and access them fine. People have suggested manually setting the ip's and dns servers and it doesn't work.
Here are a few things I've tried :
- Set a static ip .. tried 192.168.1.2, 192.168.1.99, 192.168.1.102 etc (btw the ip I get from DHCP is usually 192.168.1.102, although sometimes .100), and put in the dns servers I wrote down from a working machine (24.something) and gateway 192.168.1.1 ( the linksys router's lan ip)
this didn't work
- Tried a variation of that, obtain ip from server but manually set DNS, and vice versa -- doesn't work
- Download Opera, Netscape and tried them both, same thing cannot open page
- Reinstall Win98, take out the network card , put it back in etc -- doesn't work
- Shut everything down, unplug all the computers except this new one, and turn on modem, router and this computer - doesnt't work.
- Use a port where another computer was plugged in -- no result
- Change cables -- no result
- Upgrade Firmware for router -- doesn't work
- Replace wsock32.dll with a copy from working machine -- no luck .
I'm really running out of ideas, can somebody help me please ?
Thank You
Darrick
drochili@yahoo.com
I have a Rogers Cable connection and I have a Linksys BEFSR41 router with 3 computers connected to it. These 3 computers work fine, they can access internet and each other with no problem (2 Win98 and 1 win2000)
The problem started when I tried adding a 4th computer (Win 98) a few days ago, no matter what I tried... I couldn't get IE to open a web page on this machine. I've tried the ip addresses only (64.etc , 192.168.1.1 (the router's ip) and nothing happens... Ie just says Cannot open search page, or page cannot be displayed.
The funny thing is, I can release and renew IP's everytime, and under DHCP Client Table in the router admin, the machine is already assigned an IP. I can also ping the numeric IP addresses fine (I've tried the gateway (192.168.1.1), yahoo's (64.xx.something), rogers (24.something) etc and they all give ping replies), but if I try ping etc it just gives me unknown host.
I can also see all the other computers in network neighbourhood and access them fine. People have suggested manually setting the ip's and dns servers and it doesn't work.
Here are a few things I've tried :
- Set a static ip .. tried 192.168.1.2, 192.168.1.99, 192.168.1.102 etc (btw the ip I get from DHCP is usually 192.168.1.102, although sometimes .100), and put in the dns servers I wrote down from a working machine (24.something) and gateway 192.168.1.1 ( the linksys router's lan ip)
this didn't work
- Tried a variation of that, obtain ip from server but manually set DNS, and vice versa -- doesn't work
- Download Opera, Netscape and tried them both, same thing cannot open page
- Reinstall Win98, take out the network card , put it back in etc -- doesn't work
- Shut everything down, unplug all the computers except this new one, and turn on modem, router and this computer - doesnt't work.
- Use a port where another computer was plugged in -- no result
- Change cables -- no result
- Upgrade Firmware for router -- doesn't work
- Replace wsock32.dll with a copy from working machine -- no luck .
I'm really running out of ideas, can somebody help me please ?
Thank You
Darrick
drochili@yahoo.com