Can PBX dial Calling Card Numbers for every LD call?

[Toni269]

Just wondering if there is a way to automatically have the switch use a calling card for all long distance calls. I've got some calling cards with rates 50% lower than my dedicated T1 pricing.

I'm able to get the phone to dial the calling card by putting in the toll free calling card number on an autodial then putting the access number on another autodial.

Thanks!

 

[PBXinfo]

what you need are better rates. Send me how many minutes you do and I will blow the calling card rate away.

daveb@PBXtech.com

But to answer your question. you could manipulate the route pattern. it would be hard timing it and your call setup time would take forever. im sure your users would care if it took 30 seconds to make a LD call each time.

 

[lopes1211]

I agree. You need a new LD vendor.

-CL

 

[Toni269]

Guys, guys - - I've got seriously low rates, believe me!!!
Bareley, I mean bareley over 1 cent per minute with no surcharge. I have this under contract for a few more months and just wanted to see if I could take advantage without breaking any laws.

 

[PBXinfo]

you have a calling card that is under 1 cent? I want one of those!!