Can not access web server via PIX 501

[Jefhandle]

Hello
I configured my router to access a web server from outside:

global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
access-list inbound permit icmp any any
access-list inbound permit tcp any any eq www
access-group inbound in interface outside
static (inside,outside) tcp interface

http://www 192.168.1.100

http://www netmask

255.255.255.255

Unfurtunately i cannot still access my dynamic dns which is runing on port 80:

http://real.homelinux.net

from my pc i tried this

http://84.58.173.166

which is my current outside ip of my DSL connection
it does not work too.
Here is the result of my configure file, maybe somebody see what is wrong and could help me.
I m thankthfull for your help:
Result of firewall command: "show running-config"

: Saved
:
PIX Version 6.3(5)
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password 8jshdfhjssdfdsfdRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
hostname pixi
domain-name ciscopix.com
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
name 192.168.1.10 Ar23
access-list inbound permit icmp any any
access-list 102 permit tcp interface outside eq

http://www host

Ar23 eq www
pager lines 24
logging on
icmp permit host Ar23 inside
mtu outside 1500
mtu inside 1500
ip address outside pppoe setroute
ip address inside 192.168.1.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
pdm location Ar23 255.255.255.255 inside
pdm location Ar23 255.255.255.255 outside
pdm location 84.58.173.166 255.255.255.255 outside
pdm logging errors 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) tcp interface

http://www Ar23

http://www netmask

255.255.255.255 0 0
access-group 102 in interface outside
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout sip-disconnect 0:02:00 sip-invite 0:03:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
telnet Ar23 255.255.255.255 inside
telnet timeout 1
ssh timeout 5
console timeout 0
vpdn group pppoe_group request dialout pppoe
vpdn group pppoe_group localname ar4566023111
vpdn group pppoe_group ppp authentication pap
vpdn username ar2558023111 password *********
dhcpd address 192.168.1.2-192.168.1.33 inside
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd auto_config outside
terminal width 80
Cryptochecksum:26ddd6042b35d81110478456aad6ffba
: end

 

[Jefhandle]

in the meantime ifound out , that it works preparly from outside of my LAN!!!!!!
i schould configure my router so, that it support nat loopback to cann call the internet side from my lan!
the question is now how i do it in cisco pix 501
?

 

[DanInRaleigh]

Jefhandle,

I'm confused, is your question how to enable the web browser feature in your pix?

..also if it turns out to be a problem with ports/network, what is your topology

http://www<--->router<--->pix<--->internal_lan

http://daniel-white.com