Can NEC DT900 Work with 3CX, FreePBX, or Other SIP-Based PBX? 2

[hayl]

Hi everyone,

I have an NEC DT900 series IP phone, and I'm wondering if it can be configured to work with a SIP-based PBX like 3CX or FreePBX. I know that NEC phones are usually locked to their own PBX systems, but has anyone successfully used the DT900 with a third-party SIP server?

If so, what steps or configurations were needed? Any help or guidance would be appreciated!

Thanks!

 

[-srg-]

Yes, 3C supports DT900 phones in standard SIP mode.
The list of supported phones below is from "DT Series Administrator Guide - Core [Part Number 540-424R25]" manual.

 

[hayl]

Thank you for your help
please if you have this firmware file please forward to my email me@hayl.com

itkisipvc.tgz

 

[-srg-]

I don't have that firmware.

 

[belevedere]

Are you looking for STD SIP firmware for the NEC phone?

 

[hayl]

Are you looking for STD SIP firmware for the NEC phone?

yes for phone DT900

if you have this firmware file please share

itkisipvc.tgz

Hardware	Ver 9.1.8.0
Firmware	Ver 2.2.0.0

ITK-24CG

 

[belevedere]

Please provide an email address for drop box location

 

[hayl]

Please provide an email address for drop box location

my email me@hayl.com

Thank you

 

[timreynolds]

hi Belevedere,

Are you able to share the dropbox link with me as well please?
tim@contacx.com.au


cheers!
Tim

 

[hayl]

@belevedere could you please share the firmware
my email me@hayl.com
Thanks

 

[OzzieGeorge]

Just a note to all those posting an email address. For safety and privacy reasons, please edit your email address out of your post as soon as you receive the link.