Telecomrookie
Technical User
Can MMAS be synced to a time server (time.nrc.ca = 132.246.168.148). If not please advise. Can we do this for the MSS also or does it even require it?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Can MMAS be synced to a time server?
- Thread starter Telecomrookie
- Start date
- Status
What rel software do you have?
Ken Means
"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)
Ken Means
"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)
- Thread starter
- #3
Then yes you can if you don't have your own time server but the MSS will of course need to have internet access. And the MAS will sync off of the MSS.
To administer an NTP server:
On the Administer Linux Date and Time page, select the NTP Time Server radio button.
In the NTP Time Server field, enter the Fully qualified Domain Name or IP address of the NTP server.
Note: If the system uses a Windows Domain Controller on the corporate LAN, that server can also be used as the NTP server.
Click Add NTP Server.
Click Save.
Verify that the system confirms the change occurred successfully.
If the change occurred successfully, the system logs a message in the Server Events log about the changes. The system does not reset to the new date and time until the system is restarted.
Stop and then start the messaging software. See Stopping the messaging software and Starting the messaging software for more information
Ken Means
"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)
To administer an NTP server:
On the Administer Linux Date and Time page, select the NTP Time Server radio button.
In the NTP Time Server field, enter the Fully qualified Domain Name or IP address of the NTP server.
Note: If the system uses a Windows Domain Controller on the corporate LAN, that server can also be used as the NTP server.
Click Add NTP Server.
Click Save.
Verify that the system confirms the change occurred successfully.
If the change occurred successfully, the system logs a message in the Server Events log about the changes. The system does not reset to the new date and time until the system is restarted.
Stop and then start the messaging software. See Stopping the messaging software and Starting the messaging software for more information
Ken Means
"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)
- Status
Similar threads
- Locked
- Question
- Locked
- Question
