3.2.54 403 (trying to get 3.2.59) and can get in as admin and in to security settings, but upgrade fails immediatley like its the wrong password. have upgraded this unit before with no problem. i did for the first time before default the unit via Manager, not the serial port.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
can login to 403 but cant upgrade it
- Thread starter ABCIP
- Start date
ProviderReborn
Technical User
This is actually quite common.
You need to use the password which the unit had before being on a 3.2 build.
Try password.
If that does not work use the DTE port and default the security settings.
ACA - IP Office Implement
ACA - IP Telephony
ACS - IP Office Implement
CCNA - Working towards.
You need to use the password which the unit had before being on a 3.2 build.
Try password.
If that does not work use the DTE port and default the security settings.
ACA - IP Office Implement
ACA - IP Telephony
ACS - IP Office Implement
CCNA - Working towards.
- Thread starter
- #3
- Thread starter
- #4
- Thread starter
- #5
- Status
Similar threads
