Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Can I get a list of cards in my PBX? 2

Status
Not open for further replies.

geewizard

Technical User
Oct 5, 2011
16
US
I have a Nortel Option 61C. Is there a command that will tell me what circuit cards are installed, what slot the card is in, and what shelf?
 
Go into LD 117

Key in INV GEN CARDS. You can also use the command INV GEN SETS to list out all the digital sets. I think you might also be able to use the command INV GEN ALL that does both the previous commands.

The "CARD" command shouldn't take long to complete. Either log out and log in later or wait until you get a message stating that it's finished.

Then use the command INV PRT CARDS or INV PRT SETS etc. You will then be given a list that can captured and be saved as a *.csv file.



All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

If it's working, then leave it alone!.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top