Can i Add more boards in this Magazine?

[Monrovia]

I am new to this MD110. I am copypasting my CNLIP:LIM=1,Dev=YES; here. please advice me, that whether i can add more boards in this magazine. it is showing, some time slots are free (not equiped). And my license capacity is fully open for anything.


<CADAP;
CALENDAR DATA
IDENTITY=MD110
VERSION=CXP1010101/2/BC12SP7/R4A
CALENDAR TIME NOT VALID
10:03:12
MON 18 FEB 2008
END

<CNLIP:LIM=1,DEV=YES;

LIM CONFIGURATION
LIM NUMBER 1
LIM CONTROL LIM CONTROL NUMBER OF SERVICE
SYSTEM SIDE SYSTEM STATE PCM-LINKS STATE LIM
A EXECUTING 0 ACTIVE
B NOT EQUIPPED
MEMORY MEMORY MEMORY SPARE
VOLUME SPARE AFTER PACKING
65535 KB 12248 KB 12248 KB
BUAR1 3810 KB BUAR2 2989 KB

DEVICE BOARDS
NUMBER OF
BPOS BOARDID INDIVIDUALS SERVICE STATE
001-0-00 57 32 ACTIVE
001-0-10 102 32 ACTIVE
001-0-20 77 16 ACTIVE
001-0-22 77 16 ACTIVE
001-0-30 77 16 ACTIVE
001-0-32 87 16 ACTIVE
001-0-40 87 16 ACTIVE
001-0-42 87 16 ACTIVE
001-0-50 87 16 ACTIVE
001-0-52 87 16 ACTIVE
001-0-60 106 16 ACTIVE
001-0-62 NOT EQUIPPED
001-0-63 76 8 ACTIVE
001-0-70 42 32 ACTIVE
001-1-00 57 32 ACTIVE
001-1-10 102 32 ACTIVE
001-1-20 77 16 ACTIVE
001-1-22 87 16 ACTIVE
001-1-30 57 32 ACTIVE
001-1-40 108 16 ACTIVE
001-1-42 NOT EQUIPPED
001-1-43 NOT EQUIPPED
001-1-50 27 32 ACTIVE
001-1-60 106 16 ACTIVE
001-1-62 77 16 ACTIVE
001-1-70 57 32 SYSTEM BLOCKED


END
<

 

[DisWire]

Seems to me that you can put a 8port card in each of these slots....
1-0-62
1-1-42
1-1-43
Alternatively you can put a 8port card in 1-0-62 and a 16port in 1-1-42 but this will make 1-1-43 unuseable.

Make sure that the slots are physically available though. Sometimes you may find a HDU or other card that doesn't use timeslots sitting in a card postion.

 

[Monrovia]

thanks diswire.

what about the board on slot 001-1-70. what does "system blocked" means. is it manually blocked? so can remove it and put some other board over there?

 

[DisWire]

As the board ID is 57 then there should be a TLU76/1 (ISDN30) card in position 1-1-70.
As the system has blocked the card it's safe to assume that it's not in use.
As long as you don't need an additional ISDN30 then there's no reason why it couldn't be removed and replaced with something else.
Depending on the magazine if you remove the TLU76/1 then slot 1-1-72 may also become available.

 

[GFDANNHAUSER]

Hi Do Yourself a favour, do a SYEDP:BPOS=1-1-70; first, and see if there is anything tied to it.

BR

 

[Monrovia]

I am sorry, that time when i take cnlip, the board has some problems. now the tlu76 at 1-1-70 is working - active

DEVICE BOARDS
NUMBER OF
BPOS BOARDID INDIVIDUALS SERVICE STATE
001-0-00 57 32 ACTIVE
001-0-10 102 32 ACTIVE
001-0-20 77 16 ACTIVE
001-0-22 77 16 ACTIVE
001-0-30 77 16 ACTIVE
001-0-32 87 16 ACTIVE
001-0-40 87 16 ACTIVE
001-0-42 87 16 ACTIVE
001-0-50 87 16 ACTIVE
001-0-52 87 16 ACTIVE
001-0-60 106 16 ACTIVE
001-0-62 NOT EQUIPPED
001-0-63 76 8 ACTIVE
001-0-70 42 32 ACTIVE
001-1-00 57 32 ACTIVE
001-1-10 102 32 ACTIVE
001-1-20 77 16 ACTIVE
001-1-22 87 16 ACTIVE
001-1-30 57 32 ACTIVE
001-1-40 108 16 ACTIVE
001-1-42 NOT EQUIPPED
001-1-43 NOT EQUIPPED
001-1-50 27 32 ACTIVE
001-1-60 106 16 ACTIVE
001-1-62 77 16 ACTIVE
001-1-70 57 32 ACTIVE