Found my key codes, but I have a NTSK11ZR and its not listed in the feature set list. What do I choose, I tried a couple but they say invalid after I input the key codes. Any sugestions?
Will it mater if I skipped that part, I jumped the gun and started the install. or can they be added later? Probably don't need them, we are using it as a basic system not enhanced by any means just a used system we picked up a couple years ago.
Don't worry, you can't skip additional packagess, if the keycode validated, I assume you have no additional packages. If you had missed additional packages the keycode wouldn't validate,as you're installing you must have entered everything you need to!
I know,
this will just be a simple basic system, unfortunatly no archive. i have some old/very old papers i can somewhat start off with. Just wanted to know what to start with first,
1. CDB (Customer Data Block - LD 15)
2. CFN (Configuration Record - LD 17)
3. DDB (Digital Data Block - LD 73)
I'll start here first to see how far i get I have some old prints so I might be able to piece things together.
thanks for the help.
hi Firebird Scrambler,
Thanks for the info and taking time to do that for me, i found the keycodes i printed out a long time ago, just need to reprogram everything as i had no database to recover from.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.