Can a thread of numbers be entered on a Sys s/c or ADial key 1

[slp123]

Is the Nortel Option 11C is capable of doing the following on a 2008D or 2317 set:

A number we dial is going to a main number of an office and if you know the extension you enter it once connected.

Is it possible to enter such a entry in our System Speed List or on an Auto Dial key ( I have made AD to accept 31 entries and Syst Sp List allows at least 25)

I have tried 9*area codexxxxxxx****4 digit extension and many combinations of a similar string but nothing seems to work. The call basicly does not even get recognized to reach the main number of that office.

I also tried the same on my 3904 auto dial key but again nothing seemed to work.

Any thoughts.

 

[DocVic]

The whole number is being dial on once. Nortel does not pause with any control. The only way to get this to work is with an external auto dialer (like a Viking dialer) on a analog (500) line that you can program and use a pause, and flash to conference.

DocVic
Dedicated to Nortel Products till the end.
Need help? Call Me Now!

 

[StanleySteamer]

You can use the Personal Directory on the M3904 set to insert a pause.
Autodial or speed-dial will not let you insert a pause if your trunks are PRIs.