Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Can’t answer calls or call out!

Status
Not open for further replies.

oskare100

Technical User
Mar 25, 2005
16
SE
Hello,
I have two problems; I can't answer calls and I can't call anyone on the outside. But I can call the server and navigate through the menu and hear the recorded voice messages - but as soon as I try to answer from a softphone the call gets disconnected. Here is what I get from the asterisk CLI when I try to call out:

========================================================== ===============
== Parsing '/etc/asterisk/asterisk.conf': Found
== Parsing '/etc/asterisk/extconfig.conf': Found
Connected to Asterisk 1.4.11 currently running on localhost (pid = 15654)
Verbosity was 0 and is now 3
-- Executing [0410964106@digisip-out:1] Dial("SIP/client1-095f4a98", "SIP/0410964106@digisip") in new stack
-- Called 0410964106@digisip
[Sep 30 22:46:05] WARNING[15678]: chan_sip.c:12016 handle_response_invite: Received response: "Forbidden" from '"client1" <sip:client1@xxx.xxx.xxx.xxx>;tag=as1806b7 0d'
-- SIP/digisip-095fd960 is circuit-busy
== Everyone is busy/congested at this time (1:0/1/0)

Here is what I get when I try to answer:
-- Executing [8@digisip-in:1] Dial("SIP/client1-08cefb98", "SIP/client1") in new stack
-- Called client1
-- SIP/client1-08cf1368 is ringing
-- SIP/client1-08cf1368 is ringing
-- SIP/client1-08cf1368 is ringing
== Spawn extension (digisip-in, 8, 1) exited non-zero on 'SIP/client1-08cefb98'

This is the settings in sip.conf:
register => xxxxxx:xxxxxxx:xxxx@proxy.digisip.net/5

[digisip]
type=friend
secret=xxxxx
username=xxxx
host=proxy.digisip.net
context=digisip-in
insecure=very

[client1]
type=friend
username=client1
secret=xxxxx
host=dynamic
context=digisip-out

And this is the extensions.conf:
[digisip-out]
exten => _0.,1,Dial(SIP/${EXTEN}@digisip)
exten => _0.,3,Playback(invalid)
exten => _0.,4,Hangup

[digisip-in]
exten => 5,1,Playback(welcome.gsm,answer)
exten => 5,2,Playback(if-u-know-ext-dial.gsm,skip)
exten => 5,3,Playback(or.gsm,skip)
exten => 5,4,Playback(press-2.gsm,skip)
exten => 5,5,Playback(for.gsm,skip)
exten => 5,6,Playback(service.gsm,skip)
exten => 2,7,Playback(transfer.gsm,skip)
exten => 2,2,Goto(7,1)
exten => 7,1,Dial(SIP/client1)
exten => 7-NOANSWER,n,Goto(10,1)
exten => 7-BUSY,n,Goto(11,1)
exten => 10,1,Playback(nbdy-avail-to-take-cal.gsm,skip)
exten => 10,2,Playback(please-try-again-later.gsm,skip)
exten => 10,3,Playback(or.gsm,skip)
exten => 10,4,Playback(press-1.gsm,skip)
exten => 10,5,Playback(T-to-leave-msg.gsm,skip)
exten => 10,6,Wait,2
exten => 10,7,Playback(thank-you-for-calling.gsm,skip)
exten => 11,1,Playback(busy-pls-hold.gsm,skip)
exten => 11,2,Playback(or.gsm,skip)
exten => 11,3,Playback(press-1.gsm,skip)
exten => 11,4,Playback(T-to-leave-msg.gsm,skip)
exten => 11,5,Goto(7,1)
exten => 1,1,Voicemail(default)
exten => 1,2,Playback(your-msg-has-been-saved.gsm,skip)
exten => 1,3,Playback(thank-you-for-calling.gsm,skip)

SIP show registry:
localhost*CLI> sip show registry
Host Username Refresh State Reg.Time
proxy.digisip.net:5060 0XXXXXXX 105 Registered Mon, 01 Oct 2007 10:41:36
localhost*CLI>


SIP show peers:
localhost*CLI> sip show peers
Name/username Host Dyn Nat ACL Port Status
client1/client1 192.168.0.8 D N 5060 Unmonitored
digisip/XXXXX 82.209.165.194 N 5060 Unmonitored
2 sip peers [Monitored: 0 online, 0 offline Unmonitored: 2 online, 0 offline]
localhost*CLI>


I really don't know how to solve this so I really need help, I can't find anywhere what I causing these errors.

Best Regards
Oskar R
 
Sounds like a codec issue. Check what codecs you have allowed for your provider and for you extensions. I usually test with ulaw or alaw if the provider supports it. Seems to be pretty common and stable.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top